GlacialTech
today announces the availability of T8 Light Emitting Diode (LED)
light tubes
–
the LED T8 tubes come in ten models which range in brightness
according to the number of LED’s present over the length of the
tube.
The
three sizes of tube vary in length from 580mm to 1198mm to the
longest which stands at 1498mm. The LED T8 Tubes are designed
to replace the equivalent Fluorescent Lamps (FL) available in markets
today. Using lower wattage compared with the original product (Input
varies between 9.5W on the low brightness model to 24W on the high
brightness model). GlacialTech uses extremely high quality components
designed for high brightness and long life span. The lumens start at
480lm at a flux of 60 lm/W on the shorter lower light versions while
the high brightness longest T8 Tubes are an incredibly bright 2560lm
at 80lm/W flux.
The
innovative product incorporates the same structure and style of
traditional FL tubes but delivers a brighter performance per watt,
with less heat radiation and few of the pitfalls faced by traditional
FL tubes. The LED T8 Tubes can be used for general everyday use for
indoor applications or outdoor applications, and incorporates all the
latest luminary technology garnered from GlacialTech’s unique
resources; combining years of experience in designing cooling systems
as well as all manner of consumer electronic device power supplies.
GlacialTech
LED-T8 tubes use Super High-brightness LED emitters that consume
between 9W on the smaller models up to 24W on the larger models. As a
result, the LED-T8 tube luminaries are much cooler within a range of
-20 to +40⁰C. The LED-T8 tubes, using a fraction of the power,
are a safe, green environmentally friendly solution which reduces
global emissions through reduced power consumption. The efficient
cooling structure of the tubes is optimally designed to keep the
>50000hr longevity of the device intact, while maintaining full
brightness for longer.
Accepting
an Input voltage of 90-240V (AC), with between 9Watts to 24Watts
power consumption (Model dependant). The diameter is 25mm at a length
of 580mm on four models varying in brightness, with a further four
models at 1198mm length, and lastly another two models at 1498mm. The
weight varies between 0.25kg’s to 0.65kg’s. Essentially
these products are designed to fit into standard FL assemblies, and
thus replace traditional tubes without any inconvenience to the user.
